×

Click for
Table of Contents

menuUSW-Pro-24-POE Quick Start Guide

Package Contents

UniFi Switch
Rack-Mount Brackets (Qty. 2)
Bracket Screws (Qty. 8)
Mounting Screws (Qty. 4)
Cage Nuts (Qty. 4)
Power Cord
Rubber Feet (Qty. 4)

System Requirements

IMPORTANT: We strongly recommend using UPS backup and power regulation to prevent equipment damage due to stability issues with local AC power.

Hardware Overview

Touchscreen Display

Bootup Animation

Initializing.

Steady White

Factory defaults, waiting for adoption.

Steady Blue

Successfully adopted by a network and working properly.

Location Animation

This indicates that you clicked Locate in the UniFi Network Application. The Application will also display the location of the device on the map.

RJ45 PoE LED (Ports 1 - 24)

Off

No PoE

Amber

802.3af/at/bt PoE

RJ45 Speed/Link/Activity LED (Ports 1 - 24)

Off

No Link

Amber

Link Established at 10/100 Mbps

Flashing Indicates Activity

Green

Link Established at 1000 Mbps

Flashing Indicates Activity

SFP+ Speed/Link/Activity LED (Ports 25 - 26)

Off

No Link

Green

Link Established at 1 Gbps

Flashing Indicates Activity

White

Link Established at 10 Gbps

Flashing Indicates Activity

RJ45 (Ports 1 - 16)

RJ45 ports support 10/100/1000 Ethernet connections and 802.3af/at PoE output.

RJ45 (Ports 17 - 24)

RJ45 ports support 10/100/1000 Ethernet connections and 802.3af/at/bt PoE output.

SFP+ (Ports 25 - 26)

Hot-swappable SFP+ ports support 1/10 Gbps connections.

Reset Button

This button serves two functions for the UniFi Switch:

  • Restart Press and release the Reset button quickly.
  • Restore to Factory Default Settings Press and hold the Reset button for more than five seconds.

USP LED

The LED lights up blue when there is an active power connection on the USP DC input.

USP Connect DC Input

This DC input provides redundant power when the UniFi Switch is connected to the UniFi SmartPower Redundant Power System, model USP-RPS, via the USP Cable (not included). If there is an AC power loss or internal power supply failure, the UniFi Switch will draw power from the USP-RPS instead.

Power Port

Connect the included Power Cord to the Power port.

Installation Requirements

Hardware Installation

  1.  
  2. OR

Connecting Power

Connecting Ethernet

Connecting SFP

For information about compatible fiber SFP modules, visit: ubnt.link/UniFi_SFP_DAC_Compatibility

Specifications

USW-Pro-24-POE

Dimensions

442.4 x 285.4 x 43.7 mm
(17.42 x 11.24 x 1.72")

Weight

4.30 kg (9.48 lb)

With Rackmount Brackets4.39 kg (9.68 lb)

Interfaces

Networking(24) 10/100/1000 RJ45 Ports
(2) 1/10G SFP+ Ethernet Ports
ManagementEthernet In-Band

Power Method

Universal Input100-240VAC/50-60 Hz
USP RPS DC Input52VDC, 7.69A; 11.5VDC, 2.61A

Power Supply

AC/DC, Internal, 450W

Supported Voltage Range

100 to 240VAC

Max. Power Consumption
(Excluding PoE Output)

50W

LEDs

SystemStatus
RJ45 Data PortsPoE; Speed/Link/Activity
SFP+ Data PortsLink/Activity

ESD/EMP Protection

Air: ± 16 kV, Contact: ± 12 kV

Shock and Vibration

ETSI300-019-1.4 Standard

Operating Temperature

-5 to 40° C (23 to 104° F)

Operating Humidity

10 to 90% Noncondensing

Certifications

CE, FCC, IC

Sound Level*

25% PoE Load, 25° C Room Temperature

0.9 dBr

50% PoE Load, 25° C Room Temperature

7.3 dBr

100% PoE Load, 40° C

18.8 dBr

* Background noise level: 27.5 dBa

PoE

PoE Interfaces

Ports 1-16POE+ IEEE 802.3af/at
(pins 1, 2+; 3, 6-)
Ports 17-2460W PoE++ IEEE 802.3bt
(Pair A 1, 2+; 3, 6-) (Pair B 4 , 5+; 7, 8-)

Max. PoE Wattage per Port by PSE

802.3at32W
802.3bt64W

Voltage Range 802.3af Mode

44-57V

Voltage Range 802.3at/bt Mode

50-57V